1.建立模型打開ANSYS,進入前處理器,輸入如下命令可初步建立模型:/prep7!進入前處理器CSYS,0!激活直角坐標系k,1,6.537,-2.209,!通過直角坐標創建關鍵點k,2,-6.537,-2.209,k,3,5.606,4.023,k,4,-5.606,4.023,k,5,.000,6.900,LARC,1,5,3!通過關鍵點創建圓弧段LARC, (共 3062 字) [閱讀本文] >>